Iran Khodro Key Fob Battery Replacement – Buy Key Fob for Iran Khodro

If your Iran Khodro remote has weak range, needs repeated button presses, or stops unlocking the car consistently, the fix is often as simple as replacing the battery inside the key fob. For many Iran Khodro remotes and smart keys, the battery is commonly a CR2032 or sometimes a CR2025, depending on the key design, so the safest approach is to open the fob and match the number printed on the old battery before buying a new one. If you also own or maintain an Iran Khodro, this guide walks through what battery the key fob usually uses, how to choose the right replacement, Iran Khodro model-by-model notes, step-by-step replacement instructions, common remote problems, and when it is smarter to replace the full key fob instead of only the battery.

• Table of Contents:
• Buy Key Fob Battery Replacement for Iran Khodro
• Iran Khodro Key Fob Battery Replacement by Model
• How to Replace a Iran Khodro Key Fob Battery
• Common Iran Khodro Key Fob Problems
• Battery Replacement vs New Key Fob for Iran Khodro
• Iran Khodro Key Fob FAQ

Buy Key Fob Battery Replacement for Iran Khodro

When buying a key fob battery replacement for Iran Khodro, the most important thing is matching the exact battery code already inside your remote. Many Iran Khodro flip keys, remote keys, and smart-entry remotes commonly use a CR2032 3V lithium coin battery, while some slimmer key designs use a CR2025. Because Iran Khodro models can use different Peugeot-based or newer IKCO key housings, it is best to confirm the battery number printed on the old cell before ordering. To compare options quickly, you can browse Iran Khodro key fob battery replacements, or go directly to CR2032 replacements for Iran Khodro remotes and CR2025 replacements for Iran Khodro remotes.

• CR2032 replacement battery: This is one of the most common sizes for Iran Khodro smart keys and modern remote housings. It offers a little more capacity than CR2025, but only works if your original battery is also marked CR2032. Browse CR2032 battery options for Iran Khodro key fobs. Typical price: about $5 to $14 for a multi-pack.
• CR2025 replacement battery: Some Iran Khodro remotes use the thinner CR2025 format. If your old battery says CR2025, stick with that same size so the case closes correctly and the battery stays tight in the contacts. Compare CR2025 replacements that fit many Iran Khodro remotes. Typical price: about $5 to $12 for a multi-pack.
• Name-brand coin-cell packs: If you want better shelf life and more predictable performance, a name-brand battery can be worth it for a daily-driven Dena, Tara, Samand, or 207i. Good search terms include Panasonic CR2032 coin batteries and Energizer CR2025 coin batteries. Typical price: about $6 to $15 depending on brand and quantity.
• Remote shell and battery kits: If your Iran Khodro key fob case is cracked, buttons are worn, or the emergency key section is loose, it can make sense to replace the shell and battery together. See Iran Khodro key fob shell and battery kits. Typical price: about $10 to $25.

Iran Khodro Key Fob Battery Replacement by Model

• Iran Khodro Dena key fob battery replacement: Dena remotes and smart keys often use a coin-cell battery such as CR2032, especially on newer key designs. If the remote range drops or the lock button becomes inconsistent, open the fob and confirm the code on the old battery before ordering a Dena replacement battery.
• Iran Khodro Tara key fob battery replacement: Tara uses a newer vehicle platform, so many owners will be dealing with a more modern remote housing. In many cases, the safest choice is to match the battery already installed and avoid forcing a thicker battery into a slimmer key shell. Browse Tara key battery options if you want to compare listings first.
• Iran Khodro Samand key fob battery replacement: Samand remotes can vary by market, trim, and aftermarket replacement history, so battery confirmation inside the fob is especially important. If your Samand key fob has reduced unlocking distance, battery replacement is the first thing to try.
• Iran Khodro Soren key fob battery replacement: Soren and Soren Plus remotes often follow a similar key-fob approach to other IKCO sedan models. A fresh coin-cell battery usually solves weak button response unless the shell or board is also damaged.
• Iran Khodro Peugeot 207i key fob battery replacement: Because the 207i shares key design influences with Peugeot-based systems, battery size can depend on the exact remote style fitted to the car. To be safe, match the original battery code before buying from 207i replacement battery listings.
• Iran Khodro Peugeot Pars and 405 family key fob battery replacement: Many Pars and 405-based remotes are simple to open and service, but older housings may have brittle clips. Use light pressure when opening them and stick to the exact battery size already fitted inside.
• Iran Khodro Runna key fob battery replacement: If your Runna remote works only from very close range or needs several presses, a fresh battery is often all that is needed. Keep the old battery nearby when shopping so you can match size and polarity orientation.
• Iran Khodro Tondar 90 key fob battery replacement: Some Tondar 90 remotes use a compact shell where battery thickness matters, so never assume a CR2032 will fit if the old battery says CR2025. The wrong thickness can stop the case from closing properly.

To choose the right replacement key fob battery for Iran Khodro, start with the exact remote you have rather than the vehicle name alone. Iran Khodro vehicles use a mix of IKCO-specific and Peugeot-influenced key designs, and many older cars may already have had the remote replaced with an aftermarket shell or board. The smartest move is to open the fob, verify the battery code, and then buy the same size from a reliable seller. If the buttons are worn or the case feels loose, it can also help to compare replacement key fob shells for Iran Khodro before putting the remote back together.

How to Replace a Iran Khodro Key Fob Battery

1. Gather the tools needed. You will usually need the Iran Khodro key fob, the correct replacement battery, and a small flathead screwdriver or plastic pry tool. Helpful tools include a small flathead screwdriver, a precision screwdriver set, and plastic pry tools if you want to reduce the chance of scratching the case.
2. Remove the emergency or mechanical key if your fob has one. Many Iran Khodro remote housings include a pull-out metal key. Press the release latch and slide the key out fully so you can access the case seam more easily.
3. Find the opening seam. Look near the emergency-key slot or along the edge of the key fob case. Most Iran Khodro remotes separate in two halves at this seam.
4. Pry the case open carefully. Insert the flathead screwdriver or pry tool into the seam and twist gently. Work slowly around the case instead of forcing one corner. This is especially important on older Samand, Pars, or 405-family fobs where the plastic may be more brittle.
5. Separate the housing without disturbing the buttons. Once the case opens, keep the internal rubber buttons and circuit board aligned. Some Iran Khodro remotes have loose rubber pads that can shift when the shell is open.
6. Check the battery code before removing it. Look directly at the old battery and read the printed number, usually CR2032 or CR2025. This is the best confirmation that you have the correct replacement.
7. Remove the old battery gently. Lift it out with a fingernail, plastic tool, or the screwdriver tip used carefully. Do not bend the battery contact or scratch the board.
8. Install the new battery in the same orientation. Pay close attention to the positive (+) side and match the way the old battery sat in the holder. If the polarity is reversed, the Iran Khodro key fob will not work even though the battery is new.
9. Inspect the inside before closing the fob. Make sure the battery sits flat, the contacts are clean, and no rubber button pads are out of position. If the case gasket or inner insert shifted, reseat it before snapping the shell shut.
10. Snap the case back together and test all buttons. Reassemble the key fob, reinstall the emergency key if present, and test lock, unlock, trunk release, and panic if your remote has those functions. If the fob still responds poorly, reopen it and check battery size, orientation, and case fit.

Common Iran Khodro Key Fob Problems

• Iran Khodro key fob still does not work after battery replacement: The most common causes are the wrong battery size, battery installed upside down, or weak contact pressure inside the holder. Recheck whether the original battery was CR2032 or CR2025.
• Very short remote range: If you need to stand very close to the car before the buttons work, the battery may be low quality, old stock, or not seated properly. A fresh replacement coin battery often fixes the issue.
• Buttons feel soft, collapsed, or inconsistent: This is often a worn shell or rubber pad rather than a battery problem. In that case, a replacement shell may restore normal button feel without replacing the full electronic remote.
• Case does not close after installing the new battery: That usually means the new battery is too thick for the housing, or it is not fully seated. This often happens when someone tries to fit a CR2032 into a fob designed for CR2025.
• Intermittent response after battery change: If the remote works sometimes but not every time, inspect the battery contacts, the board alignment, and the inside of the button pad. A loose battery can cause random operation.
• Broken clips or cracked housing: Older Iran Khodro remotes can crack when opened if the plastic has hardened with age. If the shell no longer holds tightly, replacing the case may be easier than repeatedly trying to clip it back together.
• Remote battery drains too quickly: If a new battery dies unusually fast, the remote may have an internal board fault, a stuck button, or corrosion creating a constant power draw.

Battery Replacement vs New Key Fob for Iran Khodro

For most Iran Khodro owners, battery replacement should always come first. It is inexpensive, quick, and often solves the most common remote issues such as weak range, intermittent locking, or a fob that only works after several presses. If the remote was working recently and only started acting weak, a fresh replacement battery for Iran Khodro key fobs is usually the right first step.

A new key fob becomes the better option when the shell is cracked, the buttons have failed, the circuit board is damaged, or the remote still does not work even with the correct new battery installed properly. If the electronics are still fine but the housing is worn, a replacement shell may be enough. But if the board itself has failed, you may need a complete remote and, depending on the model, key cutting and programming to your Iran Khodro.

Iran Khodro Key Fob FAQ

What battery does a Iran Khodro key fob use?

Many Iran Khodro key fobs use either a CR2032 or CR2025 lithium coin battery. The exact size depends on the remote design, so the safest method is to open the fob and match the code printed on the old battery.

How do I know if my Iran Khodro key fob battery is dying?

Common signs include shorter remote range, needing to press the buttons multiple times, delayed lock or unlock response, or a remote that works only when you are very close to the car.

Can I replace a Iran Khodro key fob battery myself?

Yes. In most cases it is a simple DIY job that takes only a few minutes if you have the correct battery and a small tool to open the case carefully.

Will replacing the battery erase my Iran Khodro key fob programming?

No, a normal battery replacement does not usually erase remote programming. If the key fob stops working afterward, the most likely causes are incorrect battery size, wrong battery orientation, or a separate fault with the remote.

Can I use a CR2032 instead of a CR2025 in my Iran Khodro key fob?

Only if your remote was designed for CR2032. Both batteries are 3V, but CR2032 is thicker, so it can prevent the shell from closing properly or create fitment problems if the original battery was CR2025.

How long does a Iran Khodro key fob battery last?

Many coin-cell batteries in Iran Khodro key fobs last around two to four years, depending on use, battery quality, climate, and whether the remote has any internal drain issues.

What should I do if my Iran Khodro key fob still does not work after changing the battery?

Open the remote again and confirm the battery code, polarity, and fit. Also inspect the contacts, housing clips, and button pad. If everything looks right and it still does not work, the shell or internal board may need repair or replacement.

Do I need a new key fob or just a new battery for my Iran Khodro?

If the remote only has weak range or inconsistent response, a battery is usually enough. If the shell is broken, buttons are damaged, or the remote is completely dead even with a fresh correct battery, then a shell replacement or full new key fob is more likely needed.